Infinity Scenery - Weighted and Mounted

Previously I had done a little tip on how to weigh down the paper Infinity terrain sets. Those are working great, but there is the matter of the mat itself, which is just folded paper. When unfolding it, it jostles and has unsightly creases that raise up.

Luckily I found this extremely useful YouTube video:

Just follow his instructions, I did. These are the results:

We had bought 2 of the mats so they could stick together and make a bigger board. These are done single fold instead of tri-fold as shown in the video. I didn't plan on storing these in any boxes or anything.

This is just one of the boards. It lays very flat and solid on the ground. Much better than just letting the folded paper rest.

This is the 2 together. It makes an area about 3'x4'. If I make 2 more of them, I can get an actual 6'x4' board! But that's for a later project.

Here it is with the weighted terrain pieces. Again, this is 2 sets. A pretty good spread for some scifi skirmish gaming.

Hobby Tip - Infinity Scenery Packs

My brother and I wanted to get some more sci-fi terrain, so we saw these Infinity Scenery Packs. They are a very good price, and come with some decent amount of terrain. Not enough to cover a 4'x6', but good enough for small skirmishes.

They are pretty easy to assemble, but once we got it done we noticed something. They are made out of printed cardstock, and are very light weight. The issue is they easily get bumped around the table, and even if someone were to open a window in the house, your terrain not weighed down with lots of minis would get moved about.

So we came up with a couple of ideas to weight them down.

The building layers were easy. We got some cheap paint stirring sticks from the hardware store. Cut them down to fit the insides, and hotglued them to all 4 inside walls. It sufficiently weighed them down without getting too heavy. I would recommend hotglue over woodglue, because water based glues may soak into the cardstock and cause rippling and warping. Hotglue seemed to do the trick just fine.

The small crates were a different issue. I wanted them to be able to stand up on end, as well as lay flat. So I came up with the idea of weighing them down with wood cubes. I bought a piece of 1.5"x1.5" lumber. A long wood strip. Then we cut off pieces 1.5" long. This created a nice cube, which fit perfectly into the crates.

Now, now matter which side you lay the crate on, it gets some stability. Especially if you decide to put them up on end, the block rests at the bottom and makes it bottom heavy. No need for gluing.

We like this kit because it looks great, is cheap, and sufficient for quick terrain. We will be experimenting with the other scenery packs and try to get enough for some good tables, and see how we can weigh them down as well.